The SmartWave is a very accurate, noiseless and self-adjusting pulse radar transmitter for distances up to 100 feet. The SmartWave adjusts microwave pulse amplitude and its width to a target distance and target reflection properties. The receiver changes its sensitivity with the amplitude of received echoes. In addition, the unit analyzes the shapes of the received echoes and eliminates the ones coming from tank walls, standpipes and other obstructions. These features allow the SmartWave to track any wanted target from the tip of the rod antenna to the bottom of the tank, regardless of the tank shape or environmental conditions.

Any build up on the rod antenna does not deteriorate the performance of the radar probe. Our radar does not have any mismatch between resonator and transceiver. This eliminates problems when a target is close to the antenna and gives optimal performance of the radar.

The SmartWave Transmitter also features a low dialectic mode. In this mode SmartWave will ignore echoes from tank bottoms with material present and it will increase it’s transmit energy and sensitivity of the receiver until it will detect echoes from surfaces of the low dielectric materials. SmartWave in this mode will work with dielectrics around 2 and higher.

General Features

• Low Noise
• Accurate and Reliable
• High Sensitivity
• Self-Adjusting Amplitude and Width of Microwave Pulse
• Low Material Dielectric Setting
• Easy Two Point Push-Button Calibration
• Output 4 to 20 mA Signal
• Optional RS-232 or RS-485 Communications
• Uniform Polar Pattern
• No Mounting Influence