BinMaster product sheet: Capacitance: Pro Remote
|
The Pro Remote capacitance sensor is specially designed for high temperature, vibration, or hazardous applications. This model features remote electronics located in a separate housing. Depending upon necessary sensitivity, this allows the sensor's electronics to be safely mounted up to 75' from the sensing probe and hostile environment. Features
|
|
| Specifications:
|
|
| Power Requirements: | 120/240
VAC 50/60 Hz ± 15%, 5VA |
| Output Relay: | DPDT
10 Amp at 250 VAC STATUS Contacts: 3 Amps 240 VAC |
| Ambient
Temperature Electronics: Probe: |
-40°
to +185°F (-40° to +85°C) +250°F Delrin, +500°F Teflon |
| Pressure: | 500 PSI, ¾" Mount |
| Sensitivity Setting: | Adjustable Sensitivity to < 1 Picofarad |
| Calibration: | "Quick
Set" Course/Fine Single Turn Potentiometers |
| Fail-Safe: | Switch Selectable High/Low |
| Time Delay: | Adjust .25 to 10 Seconds |
| Enclosure Probe: Electronics: |
Cast
Aluminum, Bolt-on Cover USDA Approved Finish Plastic |
| Mounting: | 1 ¼" NPT or ¾" NPT 316 SS |
| Pro Shield: | Compensates For Material Build-up On Sensing Probe |
| Approval
Ratings Probe: Electronics: |
NRTL/C NEMA 4X, 5 and 12 Intrinsically Safe Class I Group C & D Class II Group E, F & G NEMA 4X, 5 and 12 |
| Status Indicator: |
Internal
LED Indicates Material |
| Probe Options: | Standard, Flush Mount, Flexible Extension, Teflon Sleeved, Extended Shield, Stubby |
|
1516 Commerce Drive |