Capacitance Level Sensors Brochure (1489k)

Features: Capacitance



  • Electronic stability that will firmly hold calibration
  • Temperature stable from -40°F to +180°F
  • Incorporate a unique discharge time constant detector circuit which allows sensing capacitance changes less than 1 picofarad
  • PRO series probes operate at approximately 6 kHz and do not generate radio frequencies -- we are true capacitance
  • Four level of static safeguards; (1) Static Drain (2) Gas discharge tube that does not allow voltage to rise above a certain level (3) By-Pass Capacitance on input passes a fast impulse to ground (4) Current Limiting series resistance on probe
  • Fail Safe fault detection monitoring
  • The "Quick Set" calibration feature allow for simple setup and calibration of the unit to achieve low, medium, or high sensitivity settings. Units are calibrated with the probes uncovered.
  • Multiple power capabilities
  • New stronger 5/8" stainless steel probe
  • 3/4" NPT and 1 1/4" NPT mounts standard on all 5/8"probe units.
  • PRO series (excluding Pro III) feature the PRO-Shield to guard against false indications from material side wall buildup on the sensing probe
  • Standard Delrin insulated sleeve probes that are highly abrasion resistant and inexpensive to replace should they wear out. Allows the probe to function in both dry solid or liquid applications. These sleeves also give us the coated probe necessary for explosion proof and food grade applications.
  • Multiple power pack, probe and fitting options
  • All components designed for industrial application


Products: Capacitance


PROCAP I
  • Bright LED status indicator
  • Universal power supply 24 to 240 VAC/VDC
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT Relay contacts                   
  • Adjustable sensitivity to 0.5 pF
  • Easy “Quick-Set” calibration
  • Hazardous location approvals
PROCAP II
  • Bright LED status indicator
  • 115/230 VAC Power supply
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT Relay contacts
  • Adjustable sensitivity to 0.5 pF
  • Easy “Quick-Set” calibration
  • Hazardous location approvals
PROCAP IX

  • Exp. proof Class I, Groups C & D, Class II, Groups E, F & G
  • Intrinsically safe
  • Universal power supply 24 to 240 VAC/VDC
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration
PROCAP IIX
  • Exp. proof Class I, Groups C & D, Class II, Groups E, F & G
  • Intrinsically safe
  • 115/230 VAC Power supply
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration
PROCAP I 3-A
  • Meets 3-A & USDA standards  
  • Universal power supply 24 to 240 VAC/VDC
  • Bright LED status indicator
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration  
  • Hazardous location approval
PROCAP II 3-A
  • Meets 3-A & USDA standards  
  • 115/230 VAC Power supply
  • Bright LED status indicator
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration
  • Hazardous location approval
PRO Remote
  • Remote electronics located in separate housing, designed for high temp. and vibration
  • Remote electronic can be located up to 75 feet from probe
  • Exp. Proof & intrinsically safe
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration
  • Adjustable sensitivity to 0.5 pF
Capacitance Pro Remote
PRO Auto-Cal
  • Automatic calibration & testing without removing cover
  • Bright LED status indicator
  • 115/230 VAC Power supply
  • DPDT fail-safe relay contacts
  • Easy “Quick-Set” calibration
  • Adjustable sensitivity to 0.5 pF
  • Hazardous location approvals
PROCAP I FL
  • Flush mounted probe with build-up shield
  • Bright LED status indicator
  • Universal power supply 24 to 240 VAC/VDC
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT Relay contacts                   
  • Adjustable sensitivity to 0.5 pF
  • Easy “Quick-Set” calibration
  • Hazardous location approvals
PROCAP II FL
  • Flush mounted probe with build-up shield
  • Bright LED status indicator
  • 115/230 VAC Power supply
  • Triple thread screw-off cover
  • Dual conduit entries
  • DPDT Relay contacts
  • Adjustable sensitivity to 0.5 pF
  • Easy “Quick-Set” calibration
  • Hazardous location approvals
CompactPro
  • Works where Proximity Switches don’t
  • PRO-Shield feature ignores material build-up
  • LED on housing indicates sensor status
  • Easy “One-Time” calibration
  • Compact Design; simple to install
  • For metal, plastic or other non-metallic vessels
  • 115, 230 VAC or 24 VDC units available
Capacitance Compact Pro

 

1518 Commerce Drive
Elgin, IL 60123
Tel: (800) 869-8042
Fax: (847) 697-0700

© Copywrite 2017 Mayer & Oswald, Inc. All Rights Reserved.